Fronius TransSteel 5000 Pulse User Manual

Table of contents
Safety Instructions 7
Explanation of Safety Instructions 7
General 7
Intended Use 8
Environmental Conditions 8
Obligations of the Operating Company 8
Obligations of Personnel 8
Grid Connection 9
Personal Protection and Protection of Others 9
Danger from toxic gases and vapors 9
Danger from Flying Sparks 10
Risks from grid current and welding current 10
Stray welding currents 12
EMC Device Classifications 12
EMC measures 12
EMF measures 13
Particular hazard areas 13
Requirement for the shielding gas 14
Danger from Shielding Gas Cylinders 14
Danger Posed by Shielding Gas Leak 15
Safety Measures at the Setup Location and During Transport 15
Safety Measures in Normal Operation 16
Maintenance and repair 16
Safety Inspection 17
Disposal 17
Safety symbols 17
Data backup 17
Copyright 17
General information 19
General 21
Device concept 21
Operating principle 21
Application areas 21
Warning notices on the device 22
Welding processes, procedures, and welding characteristics for MIG/MAG welding 23
General 23
Brief description of MIG/MAG standard synergic welding 23
Brief description of MIG/MAG pulsed synergic welding 23
Brief description of SynchroPulse welding 23
Brief description of the gouging (Arc Air Gouging) 24
System components 25
General 25
Safety 25
Overview 26
VRD: Safety function 27
VRD: Safety function 27
VRD: Safety principle 27
Operating controls and connections 29
Control Panel 31
General 31
Safety 31
Control panel 32
Service parameters 37
Keylock 38
Connections, Switches, and Mechanical Components 39
TransSteel 4000/5000 Pulse connections 39
3
EN-US

Fronius TransSteel 5000 Pulse Specifications

General

Brand	Fronius
Model	TransSteel 5000 Pulse
Category	Welding System
Language	English