Fronius TransSteel 5000 Pulse User Manual

Place the
wirefeeder on
the power source
CAUTION!
Danger of personal injury and damage to equipment due to falling wirefeeder.
▶
Ensure that the wirefeeder is firmly seated on the pivot pin and that the
devices, upright brackets, and trolley are positioned securely.
1
1
Fit the strain-re-
lief device of the
interconnecting
hosepack
1
2
3
4
Fit the strain-relief device on the trolley
1
2
1
3
4
Fit the strain-relief device on the wirefeeder
2
IMPORTANT! In order to prevent wear, the cables should form a "loop inwards"
when fitted. For interconnecting hosepacks with a length of 1.2 m (3 ft. 11.24 in.),
no strain-relief device is provided.
53
EN-US

Fronius TransSteel 5000 Pulse Specifications

General

Brand	Fronius
Model	TransSteel 5000 Pulse
Category	Welding System
Language	English