Commissioning
Safety
WARNING!
An electric shock can be fatal.
If the power source is connected to the grid during installation, there is a danger
of serious personal injury and property damage.
▶
Only carry out work on the device when the power source's power switch is in
the - O - position.
▶
Only carry out work on the device when the power source has been discon-
nected from the grid.
WARNING!
Danger of electrical current due to electrically conductive dust in the device.
This can result in severe personal injury and damage to property.
▶
Only operate the device if an air filter is fitted. The air filter is a very import-
ant safety device for achieving IP 23 protection.
General Commissioning is described with reference to a manual, water-cooled MIG/MAG
application.
Information on
system compon-
ents
The steps and activities described below include references to various system
components, such as
-
Trolley
-
Upright bracket
-
Cooling units
-
Wirefeeders
-
Interconnecting hosepacks
-
Welding torches, etc.
For more detailed information about installing and connecting the system com-
ponents, please refer to the appropriate Operating Instructions for the system
components.
51
EN-US
To Next Page
Loading...
Need help?
General
