Keylock A keylock can be selected to prevent the settings from being inadvertently
changed on the control panel. As long as the keylock is active:
-
Settings cannot be adjusted on the control panel
-
Only parameter settings can be retrieved
-
Any assigned "Save" button can be retrieved provided that an assigned "Save"
button was selected when the keylock was enabled
Activating/deactivating the keylock:
1
Keylock activated:
The message "CLO | SEd" appears on
the displays.
Keylock deactivated:
The message "OP | En" appears on the
displays.
The keylock can also be activated and deactivated using the keylock switch op-
tion.
38
To Next Page
Loading...
Need help?
General
