Connecting the
gas cylinder
WARNING!
Danger of severe injury and damage to property if gas cylinders fall over.
When using gas cylinders:
▶
Place them on a solid, level surface in such a way that they remain stable
▶
Secure the gas cylinders to prevent them from falling over
▶
Install the VR holder option
▶
Observe the safety rules of the gas cylinder manufacturer
1
Place the gas cylinder on the base
of the trolley
2
Secure the gas cylinder against
falling using the cylinder strap in
the upper area of the gas cylinder
(but not on the neck of the cylin-
der)
3
Remove the protective cap of the
gas cylinder
4
Briefly open the gas cylinder valve
to remove any dirt
5
Inspect the seal on the gas pres-
sure regulator
6
Screw the pressure regulator onto
the gas cylinder and tighten it
7
Connect the protective gas shield
hose of the interconnecting hosep-
ack to the pressure regulator using
a gas hose
NOTE!
US devices are supplied with an adapter for the gas hose:
▶
Seal the outside thread on the gas solenoid valve using suitable means be-
fore screwing on the adapter.
▶
Test the adapter to ensure that it is gas-tight.
56
To Next Page
Loading...
Need help?
General
