Fronius TransSteel 5000 Pulse - Activating; Deactivating Easy Documentation; Activating Easy Documentation; Set the Date and Time

Activating / deactivating Easy Documentation
Activating Easy
Documentation
1
USB 3.1
FAT32
1
Plug in the USB thumb drive
The power source display shows:
Easy Documentation is activated.
doc | on is also displayed when the
power source is switched off and on
again with the USB thumb drive con-
nected.
Easy Documentation remains activ-
ated.
2
Acknowledge the display by pressing the arrow key
3
Set the date and time
Set the date and
time
Setting the date and time is carried out in the 2nd level of the service menu.
+
1
The first parameter in the service
menu is displayed.
...
2
Select the "2nd" setup parameter us-
ing the left-hand selection dial
+
3
The first parameter in the 2nd level of
the service menu is displayed.
...
4
Select the "yEA" (= year) setup para-
meter using the left-hand selection
dial
91
EN-US