4.9 Setting function codes when switching from a conventional model
4-40
[ 3 ] Entering function codes from PC Loader
The MEGA series keypad is equipped with a USB port, allowing it to be easily connected to a PC. This allows data
to be read and copied using the PC Loader software.
PC Loader can be downloaded free of charge from the Fuji Electric website. Refer to the PC Loader software
instruction manual for details on how to use it.
4.9.2 Switching from FRENIC5000G11S/P11S or FRENIC5000G9S/P9S
Function codes and data for the FRENIC-MEGA (G2S) differ from the models above. Set function codes from the
keypad.
To Next Page
Loading...
