11.8 Braking Resistors (DB) and Braking Units
11-19
SELECTING PERIPHERAL EQUIPMENT
11.8.3 Specification
Table 11.8-1 Braking unit generated loss
Generated loss [W]
(for 10%ED type)
Table 11.8-2 Braking units, braking resistors (standard type) for HHD specification
Standard
applicable
motor (kW) [HP]
Maximum braking
torque (%)
Continuous braking
(100% braking torque)
Repetitive braking
(each cycle is 100 s or
less)
Discharge
withstand
current
rating (kWs)
Average
allowable
loss (kW)
(Note) □ in the inverter type is replaced by a letter of the alphabet.
□
S (basic type), E (type with built-in EMC filter)