Fuji Electric FRENIC MEGA G2 Series - Page 526

5.3 Description of Function Codes 5.3.9 d codes (Applied functions 2)
5-342
 d169 Line speed command (Deceleration time)
Sets the time that the machine shaft (line speed axis) decelerates from the maximum line speed (d169) setting
value [m/min] to 0 [m/min].
• Data setting range: 0.00 to 6000 (s)
ライン速度指令
[m/min]
時間[s]
d167
最大ライン速度
d168
ライン速度指令
(加速時間)
d169
ライン速度指令
(減速時間)
0
Line speed command
[m/min]
Max. line speed
Line speed command
(Acceleration time)
Line speed command
(Deceleration time)
Time [s]