11.12 AC Reactors (ACRs)
11-67
SELECTING PERIPHERAL EQUIPMENT
11.12 AC Reactors (ACRs)
Use an ACR when the converter part of the inverter should supply very stable DC power, for example, in DC link
bus operation (shared PN operation). Generally, ACRs are used for correction of voltage waveform and power factor
or for power supply matching, but not for suppressing harmonic components in the power lines. For suppressing
harmonic components, use a DCR.
If connecting to an HND specification inverter, select with an HND specification standard applicable motor.
Fig. 11.12-1 AC reactor (ACR) and connection example
To Next Page
Loading...
