Fuji Electric Time Delta-C FSV-2 - Introduction

-i-
Introduction
We thank you very much for purchasing Fuji Electric’s ultrasonic flow meter.
The instruction manual concerns the installation, operation, checkup and maintenance of the Flow transmitter
(FSV) of ultrasonic flow meter. Read it carefully before operation.
 First read this instruction manual carefully until an adequate understanding is acquired, and then
proceed to installation, operation and maintenance of the flow meter. Improper handling may result in an
accident or a failure.
 The specifications of this flow meter are subject to change without prior notice for improvement of the
product.
 Do not attempt to modify the flow meter without permission. Fuji will not bear any responsibility for a
trouble caused by such a modification. If it becomes necessary to modify the flow meter, contact our
office in advance.
 This instruction manual should always be kept on hand by the operator.
 After reading the manual, be sure to store it at a place easier to access.
 This instruction manual should be delivered to the end user.
 If the instruction manual has been lost, request another one (with charge) to our local business office.
Manufacturer: Fuji Electric Co., Ltd.
Type: Described in the nameplate put on the main body
Date of manufacture: Described in the nameplate put on the main body
Product nationality: Japan
Note
©Fuji Electric Co., Ltd. 2012
Issued in Dec., 2012
Rev. 1st edition May, 2014
Rev. 2nd edition Jun., 2016
 Reproduction of any part or the whole of this manual without
permission is strictly prohibited by laws.
 Contents of the manual are subject to change without prior notice.