Fuji Electric Time Delta-C FSV-2 - Detector Mounting; Mounting Procedures

-77-
5. Mounting of detector
5.1. Detector mounting procedure
Mount the sensor on the pipe, and perform the following steps in order before making measurement.
Reference
section
Work item : Outline steps
5.2 Selection of mounting method : Check the V/Z method, pipe size, and detector.
5.3 Mounting method on the pipe : Apply acoustic couplant to the detector oscillation surface, and
connect the sensor cable.
For the “5.3.Mounting method on the pipe”, refer to the separate instruction manual “ULTRA SONIC FLOW METER
DETECTOR”