Fuji Electric Time Delta-C FSV-2 User Manual

-22-
Setting unit Setting range Initial value Setting value
40
Output condition
DO1 output type No. of output content
menu: 10
No. of alarm menu: 3
Flow switch range
0 to 32m/s in terms of
flow velocity
Total switch range
0.000000 to 99999999
Not used

Not used

+Total pulse

-Total pulse

Range full scale 2

Alarm [All, Device error, Process error]

Flow rate switch

Flow SW high [ [(5) unit]]

Flow SW low [ [(5) unit]]

Total switch [ [(6) unit]]

Range over

Pulse range over

–Flow direction
41 DO1 Output operation No. of menu: 2 Active ON Active ON, Active OFF
42 DO2 Output type No. of output content
menu: 10
No. of alarm menu: 3
Flow switch range
0 to 32m/s in terms of
flow velocity
Total switch range
0.000000 to 99999999
Not used

Not used

+Total pulse

-Total pulse

Range full scale 2

Alarm [All, Device error, Process error]

Flow rate switch

Flow SW high [ [(5) unit]]

Flow SW low [ [(5) unit]]

Total switch [ [(6) unit]]

Range over

Pulse range over

–Flow direction
43 DO2 Output operation No. of menu: 2 Active ON Active ON, Active OFF
44 Zero calibration -5 to 5m/s in terms of
flow velocity
0.000m
3
/h [(5) unit]
45 Span calibration -200.00 to 200.00% 100.00% %
46 Operation mode No. of menu: 2 Standard Standard, High speed
47
Communication
Communication mode No. of menu: 1 RS-485 RS-485
48 Baud rate No. of menu: 3 9600bps 9600bps, 19200bps, 38400bps
49 Parity No. of menu: 3 Odd None, Odd, Even
50 Stop bit No. of menu: 2 1 bit 1 bit, 2 bits
51 Station No. 1 to 31 1 (In case of RS-485)
52 Communication protocol No. of menu: 2 MODBUS MODBUS, M-Flow
53
LCD
LCD BACKLIGHT No. of menu: 2 ON ON, OFF
54
LIGHTS OUT TIME 0 to 99 min 5 min min
*1) English is set when 4th digit of the type is “E”.
FSV
□
S : Japanese
FSV
□
E : English

Fuji Electric Time Delta-C FSV-2 Specifications

General

Brand	Fuji Electric
Model	Time Delta-C FSV-2
Category	Measuring Instruments
Language	English