Faxing 245
8.1.7
(b)
"This equipment shall not be set up to make automatic calls to the Telecom '111' Emergency
Service."
8.2.1(b) Call answering
When this equipment is set up call answering not within 3~30 sec, the telephone or answering
machine shall answer incoming call with 3~30 sec.
NOTE:
• Do not connect your printer directly to a DSL (digital subscriber line). This may damage the printer. To use a
DSL, you will need to use an appropriate DSL filter. Contact your service provider for the DSL filter.
1 Plug one end of a telephone line cord to the wall jack connector and the other end to an active
wall jack.
NOTE:
• The supplied telephone cord has four-contact plugs. It is recommended you use a telephone cord with four-
contact plugs and a wall jack with four contacts for a telephone line connection.
2 To connect a telephone and/or answering machine to your printer, plug the telephone or
answering machine line cord into the phone connector ( ).
Wall jack connector
To the wall jack
Phone connector
To an external telephone
or an answering machine
To Next Page
Loading...
Need help?
General
