324 Using the Operator Panel Menus and Keypad
• Sharpness
Purpose:
To specify the default sharpness level.
Values:
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
Sharpest Makes the scanned image sharper than the original.
Sharper
Normal* Does not make the scanned image sharper or softer than the original.
Softer Makes the scanned image softer than the original.
Softest
* Factory default menu setting
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the
scanned image.
* Factory default menu setting
2 mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See "mm / inch" on
page 309 for more information.
0-50 mm/0.0-2.0 inch
* Factory default menu setting
2 mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch. Which factory
default menu setting displays depends on the value selected for mm /
inch under the System Settings menu. See "mm / inch" on
page 309 for more information.
0-50 mm/0.0-2.0 inch
* Factory default menu setting
To Next Page
Loading...
