Printer Connection and Software Installation 87
6 Configure the security setting, and then click Next.
The IP Address Settings screen appears.
7 Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
a Select Type.
b If you have selected Use Manual Address from Type, enter the following items:
• IP Address of your printer
• Subnet Mask
• Gateway Address
When Dual Stack is selected, configure the following:
a Configure IPv4 Settings.
b If you have selected the Use Manual Address check box under IPv6 Settings, enter the
following items:
• IP Address of your printer
• Gateway Address
To Next Page
Loading...
Need help?
General
