Printer Connection and Software Installation 97
For Windows Server 2008 R2 and Windows 7:
a Display Control Panel.
b Select Network and Internet.
c Select Network and Sharing Center.
d Select Connect to a network.
e Select xxxxxxxx (xxxxxxxx indicates a wireless device’s SSID which you use) from the
network items listed in the available network list, and click Connect.
2 Check the IP address assigned by AutoIP on the printer.
a On the operator panel, press the (System) button.
b Select Admin Menu, and then press the button.
c Select Network, and then press the button.
d Select TCP/IP, and then press the button.
e Select IPv4, and then press the button.
f Select IP Address, and then press the button.
(Default IP address range: 169.254.xxx.yyy)
3 Ensure that the IP Address on your computer is assigned by DHCP.
4 Launch your web browser.
IP Address
169.254.000.041*
To Next Page
Loading...
