8.2 NAS Wizard
Step 4: Confirm
1. Review the settings you selected to make sure they are correct (see "NAS Wizard:
Confirm" on page 139). If necessary, click Previous to return to a previous step to
make changes.
2. To make changes to a NAS share you added, first select the share and click Delete to
delete the share. Then click Previous to return to the previous step and add a new
share.
3. After you have confirmed all settings, click Finish. The wizard configures the ETERNUS
CS800 with the settings you selected.
Figure 103: NAS Wizard: Confirm
Step 5: Download Client Plug-in
To download the Application Specific (RMAN) Plug-in, click Download Client Plug-in (see
"NAS Wizard: Download Client Plug-in" on page 140). On the download page, download
the correct RMAN Plug-in for your Oracle Database and operating system.
The README file enclosed with the download describes how to install, configure and use
the plug-in.
ETERNUS CS800 139
To Next Page
Loading...
