8.4 OST Wizard
To remove an LSU, select it in the LSUs Added table and click Delete.
4. Click Next to continue.
To configure the LSU for Automatic Image Replication, use the Configuration > OST >
LSU page (see "LSU" on page 238).
Figure 113: OST Wizard: Add LSUs
Step 4: Confirm
1. Review the settings you selected to make sure they are correct (see "OST Wizard:
Confirm" on page 151). The items to be added display in the Storage Servers Added,
LSUs Added, and Users Added tables. If necessary, click Previous to return to a
previous step to make changes.
2. To make changes to storage servers, LSUs, or users you added, click Previous to return
to the appropriate step. Select the incorrect item and click Delete to remove it, and
then add a new item.
3. After you have confirmed all settings, click Finish. The wizard configures the ETERNUS
CS800 with the settings you selected.
ETERNUS CS800 150
To Next Page
Loading...
