10.3 VTL Configuration
Export Removes a cartridge from the virtual media changer
and places it in an exported state. Perform this
action if an export cannot be performed from the
backup application. The cartridge must be in the
vaulted, scratch, or virtual state.
Recycle Recycles (erases) a cartridge so it can be reused by
the partition.
Write Protect (WP) Enables or disables write protection for the cartridge.
Import Media Imports cartridges into the currently selected
partition. Cartridges that are in the exported or
vaulted state can be imported from another partition
with the same media type and data deduplication
settings.
After you select an action, the table is updated to show only the cartridges that
support the selected action. Select Show All Media in the Action drop-down box to see
all cartridges.
3. (Optional) To reduce the number of cartridges displayed in the table, enter a barcode
or barcode range in the Barcode Filter box and click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to indicate a wildcard.
Separate multiple entries with commas, and do not use spaces.
Example: Enter AAA* to display all cartridge barcodes beginning with AAA. Or enter
AAA010-AAA020 to display all barcodes in the specified range. Click the Quick Tip
icon [?] for additional examples.
4. Select the cartridges to perform the action on. The action is performed only for
selected cartridges on the current page.
Or select the check box in the table heading row to perform the action on all
cartridges in the partition.
If necessary, use the controls at the bottom of the table to navigate between
multiple pages of results. Select the number of rows to display in the Show
drop-down box.
5. Click Apply.
Media Move
Use the Media Move page to move a virtual tape cartridge from a source location (drive,
storage slot, or I/E slot) to a destination location (drive, storage slot, or I/E slot). The
location and destination must be in the same partition.
ETERNUS CS800 216
To Next Page
Loading...
