Fujitsu ETERNUS CS800 S6 - Page 246

10.4 OST Configuration
Description A brief description of the remote user (if available).
To update the list with the latest information, click Refresh.
Adding a Remote User
Add a remote user to create OST user credentials for use with OST AIR. When you enable
Automatic Image Replication for an LSU, you specify a remote user. The remote user
credentials on the source ETERNUS CS800 must match the local user credentials on the
target (remote) ETERNUS CS800.
To add a remote user:
1. Click Add.
The Add Remote AIR Credential window displays (see "Add Remote AIR Credential" on
page 246).
Figure 170: Add Remote AIR Credential
2. Enter information about the remote user:
User name Enter the name of the remote user.
New Password Enter the password for the remote user.
Confirm New Password Enter the password again to confirm it.
Description (Optional) Enter a brief description of the remote
user.
3. Click Apply.
Editing a Remote User
Edit a remote user to change the user's password or description.
To edit a remote user:
1. Select the user and click Edit.
The Edit Remote Credentials window displays (see "Edit Remote Credentials" on page
247).
ETERNUS CS800 246