Fujitsu ETERNUS CS800 S6 - Page 263

10.7 Scheduler
Figure 182: Scheduler Page
Tasks
Use the Scheduler page to perform the following tasks:
l View currently scheduled events (see "Viewing Scheduled Events" on page 263).
l Add a new scheduled event or edit an existing event (see "Adding or Editing a
Scheduled Event" on page 264).
l Configure NAS shares or VTL partitions for scheduled replication (see "Scheduling a
Share or Partition for Replication" on page 266).
l Configure replication throttle events (see "Scheduling Replication Throttling" on page
266).
l Configure the ETERNUS CS800 to send status and configuration reports (see
"Scheduling E-mail Reports" on page 268).
l Configure the ETERNUS CS800 to run healthchecks (see "Scheduling Healthchecks" on
page 268).
l Configure the ETERNUS CS800 to run space reclamation (see "Scheduling Space
Reclamation" on page 269).
l Specify when and how often an event reoccurs (see "Setting Recurrence for a Scheduled
Event" on page 269).
l Remove an event occurrence or event series from the schedule (see "Deleting a
Scheduled Event" on page 270).
Viewing Scheduled Events
The Scheduler page displays all replication, replication throttle, e-mail report,
healthchecks, and space reclamation events scheduled to occur in a selected time period.
ETERNUS CS800 263