10.8 Notifications
Figure 200: AISConnect Control Page
If the AISConnect service is stopped, call-home and dial-in functionality is disabled.
To stop or start the AISConnect service:
1. From the AISConnect page, click the Control tab.
2. Do one of the following actions:
l Click Start to start the AISConnect service.
l Click Stop to stop the AISConnect service.
Remote Access Policies
Use the Remote Access Policies page to view the current remote access policies status, or
to enable or disable remote access policies (see "AIS Remote Access Policies" on page
291).
Figure 201: AIS Remote Access Policies
Remote access policies must be enabled for a Fujitsu support specialist to remotely
connect to the system using SSH or HTTP. If remote access policies are disabled, remote
connection using SSH or HTTP is not possible.
ETERNUS CS800 291
To Next Page
Loading...
