10.9 System
StartTLS/LDAPS Select one of the following:
l Start TLS - Select to encrypt the
connections to the LDAP/AD server.
This enables a secure connection over a
standard port. Do not enable Start TLS to
encrypt connections if the server URL uses
a secure protocol (LDAPS).
l LDAPS - Select if the server URL uses the
LDAPS secure protocol.
Port l Start TLS - Default port is 389.
l LDAPS - Default port is 636.
Entering a port setting will disable the
default port settings.
Certificate URL (Start TLS only) Enter the URL where the
Certificate Authority (CA)
certificate in PEMformat can be downloaded
from.
When using an alternate domain server
too, you may have to provide both
certificates stored in one file.
Principal (bind) DN Enter the domain name of the principal user.
The principal user is any user who is
authorized to add a system to the LDAP or AD
domain.
Example -
uid=admin,ou=People,dc=mycompany,dc=com
Password Enter the password for the simple
authentication.
Confirm Password Re-enter the password for the simple
authentication.
3. Enter the Search Strings, which are building the base DN to restrict user searches to a
specific subtree:
User DN Enter a distinguished name for retrieving user
information.
Example - dc=mycompany,dc=com
ETERNUS CS800 322
To Next Page
Loading...
