10.9 System
1. Select an option in the Encryption drop-down box:
None OST data is not encrypted.
Default AES 128 OST data is encrypted using AES 128-bit encryption.
Default AES 256 OST data is encrypted using AES 256-bit encryption.
TLS with AES 256 OST data is encrypted using AES 256-bit encryption
with Transport Layer Security (TLS).
AES encryption options are available only if the Data-in-Flight license is
installed.
2. If you selected the TLS with AES 256 encryption option, you must install the required
certificate and key files on the ETERNUS CS800:
l Certificate File
l Private Key File
l Certificate Authority File
l Rejection List File
The certificate and key files installed on the ETERNUS CS800 system must match the
files on the OST media server. For more information on certificate and key files, see the
OST Plug-in Installation Instructions (6-67074).
CAUTION!
To install a file, click the Browse button to browse the system and locate the file,
and then click Open.
You can install new certificate and key files at any time, as long as there are
no active network connections between the OST media server and the
ETERNUS CS800.
3. Click Apply.
To clear all changes without saving them, click Reset. To remove user
installed certificate and key files, click Restore Factory Defaults.
Login Session
The Login Session page allows you to specify the inactivity timeout for the ETERNUS CS800
remote management console. The default timeout is 30 minutes.
When the remote management console is inactive for the specified period of time, the user
is automatically logged off and must log back on to continue (see "Remote Management"
on page 122).
To access the Login Session page, on the Security page, click Login Session (see "Login
Session Page" on page 329).
ETERNUS CS800 328
To Next Page
Loading...
