10.9 System
Figure 232: Login Session Page
To specify the inactivity timeout:
1. In the Inactivity Timeout box, enter the number of minutes of inactivity before a user
is automatically logged off (1–60 minutes).
2. Click Apply.
Security Notice
The Security Notice page allows you to specify a message that will appear to all users
when logging on to the remote management console or the CLI (command line interface).
If a security notice message has been specified, the user must accept the message in order
to begin using the system. If no security notice has been specified, the user can use the
system immediately after logging on.
To access the Security Notice page, on the Security page, click Security Notice (see
"Security Notice Page" on page 329).
Figure 233: Security Notice Page
To add or update a security notice message, enter the message in the box and click Apply.
Storage Encryption (Scale model only)
The Storage Encryption page allows you to set up data encryption for stored user data.
ETERNUS CS800 329
To Next Page
Loading...
