11.4 Receive VTL
Figure 255: Received Snapshots Page
Tasks
Use the Received Snapshots page to perform the following tasks:
l View information about received snapshots (see "Snapshots List" on page 368).
l Recover a partition on the target system (see "Recovering a Partition" on page 369).
l Failback a partition to the source system (see "Performing a Failback For a Partition"
on page 370).
l Delete a received snapshot (see "Deleting a Snapshot" on page 372).
The target system will retain up to 10 replication snapshots (default setting) for
each replicated partition. Once 10 snapshots have been saved, the oldest
snapshot is deleted to make room for each new snapshot that is received. (To
change the maximum number of snapshots retained for each partition, see
"Changing the Maximum Number of Snapshots" on page 260).
Snapshots List
The Snapshots List displays all available snapshots that have been received from
configured replication sources. Snapshots are grouped by VTL partition. To see all
available snapshots for a partition, click the plus icon [+] next to the partition name.
The Snapshots List displays the following information about each snapshot:
Partition Name The name of the partition.
Source System The hostname of the system that the snapshot was sent
from.
ETERNUS CS800 368
To Next Page
Loading...
