12.2 Hardware
information for components such as the system board, host bus adapters, network ports,
and storage arrays.
To access the Hardware page, click the Status menu, and then click the Hardware tab.
The Hardware page contains the following tabs:
l "Summary" on page 382
l "Details" on page 383
Summary
The Hardware Summary page allows you to view the overall status of the node and its
main components. The system and each component can have one of the following
statuses:
Normal (Green) The hardware is operating correctly.
Attention (Yellow) There is a problem with the hardware.
Failed (Red) The hardware has failed.
To access the Hardware Summary page, on the Hardware page, click the Summary tab
(see "Hardware Summary Page" on page 382).
Figure 265: Hardware Summary Page
The Hardware Summary page displays the following information:
Available System Memory
(RAM)
The total amount of memory (RAM) installed in the
system.
Free System Memory (RAM) The amount of system memory (RAM) that is currently
free.
State The status of the node.
Status The overall status of all components in the node.
ETERNUS CS800 382
To Next Page
Loading...
