Fujitsu ETERNUS CS800 S6 - Page 390

12.3 Performance
l The vertical axis displays data throughput (0–125 MB/s for 1 GbE ports or 0–1.25 GB/s
for 10 GbE ports).
l Values that exceed the maximum value of the vertical axis are shown in lighter green.
l Each bar on the graph represents approximately 1 second of time.
l Hold the cursor over a bar to display the value of the bar.
RAID
The RAID page allows you to view throughput performance for RAID read and write
activity.
To access the RAID page, on the Performance page, click the RAID tab (see "RAID Page" on
page 390).
Figure 272: RAID Page
Use the RAID page to display recent RAID activity in dynamic graphs:
l The top graph reports data reads and the bottom graph reports data writes.
l The horizontal axis displays time (0–100 seconds).
ETERNUS CS800 390