14.4 Space Reclamation
Low Space or Legacy Mode When disk capacity is low, space reclamation is
automatically started to free up disk space. In this case,
all four stages of space reclamation are run.
To access the Space Reclamation page, click the Utilities menu, and then click the Space
Reclamation tab (see "Space Reclamation Page" on page 424).
Figure 298: Space Reclamation Page
The Space Reclamation page displays the following information about the current or most
recent space reclamation activity:
Status The status of space reclamation (see "Space Reclamation
Status" on page 425).
Stage Progress The progress of the current space reclamation stage.
Total Progress The overall progress of space reclamation activity.
Start Time The time space reclamation started.
End Time The time space reclamation ended.
Reclaimable Space The disk space that is occupied by outdated deduplicated
data and which will be automatically reused if additional
space for new deduplicated data is needed. Displays
Pending when space reclamation is running.
Because the ETERNUS CS800 can automatically use
reclaimable space to store new deduplicated data,
space reclamation statistics may be affected
(appear lower) if ingest occurs at the same time as
space reclamation.
Tasks
Use the Space Reclamation page to perform the following tasks:
ETERNUS CS800 424
To Next Page
Loading...
