Fujitsu ETERNUS DX60 S3 - Page 1001

Appendix B Factory Default List
B.3 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1001
■ Set FC Port QoS
■ Set iSCSI Port QoS
■ Set SAS Port QoS
■ Set FCoE Port QoS
■ Add LU QoS Group
■ Create Shared Folder
Screen Setting item Default value
FC Port QoS Setting Bandwidth Limit Unlimited
Screen Setting item Default value
iSCSI Port QoS Setting Bandwidth Limit Unlimited
Screen Setting item Default value
SAS Port QoS Setting Bandwidth Limit Unlimited
Screen Setting item Default value
FCoE Port QoS Setting Bandwidth Limit Unlimited
Screen Setting item Default value
LU QoS Group Setting Bandwidth Limit Unlimited
Screen Setting item Default value
Shared Folder Settings Protocol CIFS
Writable Yes
Oplocks Disable
Owner root
Group root
SMB Encryption of Data Access Disable
Access Based Enumeration Disable
Select Volume Radio button to select a
volume
• When only one NAS user volume exists:
The checkbox for the relevant volume is
selected
• When multiple NAS user volumes exist:
All the checkboxes are cleared