Fujitsu ETERNUS DX60 S3 - Page 1002

Appendix B Factory Default List
B.3 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1002
■ Create NAS Interface
■ Change NAS Server Name
*1: "DX" is fixed and "yyyyyyyyyy" indicates the serial number of the ETERNUS DX S3 series.
■ Add Quota Setting
Screen Setting item Default value
NAS Interface Settings RIP Setting Enable
Redundant Port None
IP Address Not specified
Subnet Mask Not specified
Gateway Not specified
IPv6 Link Local Address Not specified
IPv6 Connect IP Address Not specified
IPv6 Gateway Not specified
IPv6 Prefix length Not specified
Screen Setting item Default value
NAS Server Settings Name DXyyyyyyyyyy (*1)
Screen Setting item Default value
Select Volume Radio button to select a NAS
user volume
• If only one NAS user volume exists
The relevant volume is selected
• If two or more NAS user volumes exist
No volumes are selected
Add Quota Target Type User
Drive Space
Warning
• Blank (unlimited)
• GB
Limit
• Blank (unlimited)
• GB
File Count
Warning 0 (unlimited)
Limit 0 (unlimited)