Fujitsu ETERNUS DX60 S3 - Page 373

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
373
For details on the parameters for this function, refer to "A.4.2.2 Add iSCSI Host Group" (page 819).
For the factory default settings for this function, refer to "Appendix B Add iSCSI Host Group" (page 993)
.
The procedure to create an iSCSI host group is as follows:
Procedure
1 Click [Add iSCSI Host Group] in [Action].
2 Input a host group name to be created, and select a host response to be assigned to the
host group.
The main setting items are as follows.
● Host Group Setting
• Host Group Name
• Host Response
• To change the settings of the host groups, use the procedure in "4.2.5 Modify Host Group" (page 385).
• To add a port to an existing host group, use the procedure in "4.2.5 Modify Host Group" (page 385)
.
• To change the iSCSI host information, use the procedure in "4.2.16 Modify iSCSI Host" (page 425)
.