Fujitsu ETERNUS DX60 S3 - Page 374

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
374
3 Register a host in a host group in the following procedures, and click the [Add] button.
■ When registering a host by selecting from the host list
(1) Click the [Now Connected] tab.
The following hosts are displayed in the [Now Connected] tab:
- Hosts that are connected to an iSCSI-CA or an iSCSI-CA/RA but are not registered in the ETERNUS
DX (*1)
*1: "Host that is not registered in the ETERNUS DX" indicates that a host with the same iSCSI name, IP
version, and Alias Name as the target host is not registered in the storage system. The host is
regarded as unregistered host even if a host with the same iSCSI name, IP version, Alias Name, and
different IP address is already registered. The obtained "iSCSI Name", "IP Version", "IP Address", and
"Alias Name" are displayed.
- Hosts that are connected to an iSCSI-CA or an iSCSI-CA/RA and registered in the ETERNUS DX
- Hosts that are not connected to an iSCSI-CA or an iSCSI-CA/RA but are registered in the ETERNUS
DX
Click the [Rediscover] button to update the iSCSI host list.
(2) Select a host to be registered from the iSCSI host list and register the iSCSI host information (the IP
address and the Alias name, etc.) to the selected host.
The main setting items are as follows.
● Host Group Setting
• Checkbox to select a host
• IP Version
• IP Address
• Alias Name
• CHAP User ID
• Change CHAP Password
• CHAP Password
• Confirm CHAP Password