EasyManua.ls Logo

Fujitsu ETERNUS DX60 S3 - Page 827

Fujitsu ETERNUS DX60 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
827
CHAP User ID
Change CHAP Password
CHAP Password
Confirm CHAP Password
Description The user ID of the member host, for which CHAP Authentication will be used, is
displayed.
To use the CHAP Authentication on the iSCSI host to be added, select the checkbox of the
iSCSI host, and enter the user ID. It is not necessary to specify this item if the CHAP
Authentication is not used.
If the iSCSI host has already been registered in the ETERNUS DX, the user ID is displayed.
Make sure to set the user name and password together.
Input condition/
Display contents
Up to 255 alphanumeric characters and symbols (except "," (comma) and "?")
Spaces
Description To register or change the CHAP Authentication password, select the checkbox.
The checkbox can be selected only when the iSCSI host has been selected.
Input condition/
Display contents
Checkbox
Selected
Cleared
Description The password for the member host, on which the CHAP Authentication will be used, is
displayed with "*".
To use the CHAP Authentication on the iSCSI host to be added, enter the password.
It is not necessary to specify this item if the CHAP Authentication is not used.
The password can be entered only when the iSCSI host has been selected, and the
"Change CHAP Password" checkbox has been selected.
Make sure to set the user name and password together.
Input condition/
Display contents
12 - 100 alphanumeric characters and symbols (except "," (comma) and "?")
Spaces
Description The confirmation password for the member host, on which the CHAP Authentication will
be used, is displayed with "*".
To use the CHAP Authentication on the iSCSI host to be added, re-enter the password for
confirmation. It is not necessary to specify this item if the CHAP Authentication is not
used.
The password can be entered only when the iSCSI host has been selected, and the
"Change CHAP Password" checkbox has been selected.
Input condition/
Display contents
12 - 100 alphanumeric characters and symbols (except "," (comma) and "?")
Spaces

Table of Contents

Other manuals for Fujitsu ETERNUS DX60 S3

Related product manuals