Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
828
● Host Setting
• iSCSI Name
A.4.2.6 Modify Host Group (SAS)
For details about this function, refer to "4.2.8 Modify Host Group (SAS)" (page 399).
● Host Group Setting
• Host Group Name
• Host Response
• Checkbox to select a host
Description Input the iSCSI name of the iSCSI host (required).
Input condition/
Display contents
• 4 - 223 alphanumeric characters and symbols ('-', '.', ':')
• The name starts with "iqn." or "eui."
Description Specify the host group name.
An existing host group name cannot be used. Refer to "Naming conventions for adding
hosts" (page 1053) for details.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
Input condition/
Display contents
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses created in the ETERNUS DX
• Default
Description Select the corresponding host checkbox in the SAS host list, to add a host. Clear the
corresponding host checkbox in the SAS host list, to delete a host.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
To Next Page
Loading...
