CHAPTER 3
Small Configuration
Installing the LAS2 Shelf
3-65
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
Install the FC9503LAS2 shelf as follows:
1 Unpack the FC9503LAS2 shelf from the shipping container.
2 Is the FC9503LAS2 to be installed in a 19-inch relay rack?
If YES:
Proceed to Step 3 [p. 3-65].
If NO:
Proceed to Step 8 [p. 3-67].
3 Get the flange kit for 19-inch rack mounting. Table 3-6 [p. 3-65] lists the flange kit part
numbers.
Table 3-6: Flange Kits for FC9503LAS2 Shelf Installation
Flange Kit Part Number
Flange kit for 19-inch relay rack installation FC9503FLG5
Flange kit for 23-inch relay rack installation FC9503FLG6
To Next Page
Loading...