CHAPTER 4
ETSI Configuration
Installing Fans, Rack Covers, and End Panels
4-55
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
8 Locate the mounting hole locations for the ETSI upper rack cover. See Figures 4-38 [p. 4-55]
and 4-39 [p. 4-56] to review and select the applicable configuration. Using the selected figure
as a reference, remove and discard the four mounting screws, or mark the mounting hole
locations.
Figure 4-38: Upper Cover Standoffs with Upper FLASHWAVE 7500 Shelf
r1430_1
Remove and discard
mounting screws
from these locations.
To Next Page
Loading...