Fujitsu SPARC EnterpriseM3000 User Manual

2-94 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
Specifying a Time Zone
■ Command operation
1. Use the showtimezone(8) command to display the time zone.
2. Use the settimezone(8) command to set the system time. The platadm
privilege is required.
Prefer Specifies/cancels “prefer” to an NTP server
for XSCF network.
If prefer is specified, the NTP server
specified first by setntp (8) command has
priority over the others.
setntp The default is prefer
specified.
Stratum
value
Specifies a stratum service for XSCF.
You can specify an integer from 1 to 15.
setntp The default stratum value
is 5.
Local clock Sets the clock address of the XSCF's own
local clock.
A numeric from 0 to 3 can be specified for
the least significant byte of the clock address
of the local clock.
setntp The default clock address
of the local clock is
127.127.1.0.
Reset time
subtraction
Resets the time subtraction between the
XSCF and each domain, which is stored in
XSCF.
As a result, the time of each domain will be
set to the same time as the XSCF after
startup.
resetdateoffset The settings can be enabled
when all of the domains are
powered off.
Display time
subtraction
Displays the time subtraction between the
XSCF and each domain.
showdateoffset
XSCF> showtimezone -c tz
America/Chicago
TABLE 2-11 Setting Time and Date (Continued)
Item Description Shell Command Remarks

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English