Fujitsu SPARC EnterpriseM3000 User Manual

4-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
4.1.1 Displaying System Information
■ Command operation
1. Use the showhardconf(8) command to check the mode switch status.
2. Use the showdate(8) command to display the system time.
3. Use the version(8) command to display the XCP comprehensive firmware
version, XSCF version, and OpenBoot PROM version.
(This screenshot is provided as an example.)
XSCF> showhardconf
SPARC Enterprise xxxx;
+ Serial:PP20605005; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Powered Off;
MBU_B Status:Normal; Ver:0101h; Serial:7867000282 ;
:
XSCF> showdate
Thu Jul 6 14:48:01 UTC 2006
XSCF> version -c xcp -v
XSCF#0 (Active)
XCP0 (Current): 1082
OpenBoot PROM : 02.09.0000
XSCF : 01.08.0005
XCP1 (Reserve): 1082
OpenBoot PROM : 02.09.0000
XSCF : 01.08.0005
XSCF#1 (Standby )
XCP0 (Current): 1082
OpenBoot PROM : 02.09.0000
XSCF : 01.08.0005
XCP1 (Reserve): 1082
OpenBoot PROM : 02.09.0000
XSCF : 01.08.0005
OpenBoot PROM BACKUP
#0: 02.08.0000
#1: 02.09.0000

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English