6-6 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
■ MSG-ID: Message ID. Use the message ID for accessing the specified URL to
acquire detailed information on this problem. For the specified URL, see the Web
site information about messages described in the Product Notes for your server.
For the message ID, the following information can be confirmed at the Web site:
■ Message type (Type)
■ Fault level (Severity)
■ Outline of fault (Description)
■ Machine operation after failure (Automated Response)
■ Influence (Impact)
■ Action to be taken (Action)
■ Detailed information (Details)
■ TYPE, SEVERITY, DESC, AUTO-RESPONSE, IMPACT, and REQ-ACTION, these
are the same items that the web site information in MSG-ID corresponds.
■ VER: Version
■ EVENT-TIME: Time of fault occurrence (indicated in local time)
■ FLATFORM: Target architecture
■ CSN: Chassis serial number
■ DOMAIN-ID: Domain ID
■ SERVER-ID: ID of this system
■ EVENT-ID: Number used to uniquely identify the problem in an arbitrary system
set
■ DIAGCODE: Field engineers and authorized service personnel use this code for
troubleshooting. The user is requested to inform the field engineer and authorized
service personnel of this code, which is useful in resolving problems at an early
stage.
■ Msg: Message to show summary of problem
6.4 Test Mail
After XSCF mail function settings are made, a test mail can be sent to verify the
settings. The send time of the test mail (the local time is displayed) and the
information about the mail sender are displayed. Also, the "Test Mail:" characters
are included in the subject of the test mail.
To Next Page
Loading...
