Chapter 3 Connecting to the XSCF and the Server 3-11
1. Perform the console(8) command on the XSCF Shell terminal screen to select
the domain console.
Note – One RW console can be connected in one domain. If a user with platadm or
domainadm user privilege forcibly connects a RW console, the currently connected
RW console is disconnected.
2. To switch from the domain console to the XSCF Shell, press the "#" (default
escape character) and “.” (period) keys while holding down the Enter key.
3. Confirm that the XSCF Shell prompt (XSCF>) is displayed in the terminal.
4. To set a escape character different from the default value, perform the
console(8) command with specifying the option. It is enabled only at the
current session.
Note – For details on types of the escape character, see the man page or the XSCF
Reference Manual.
3.2 Types of XSCF Connections
This section provides some examples of XSCF connection.
XSCF> console -d 0
<Example> Change the escape character to |.
XSCF> console -d 0 -s “|”
Console contents may be logged.
Connect to DomainID 0?[y|n] :y
To Next Page
Loading...
Need help?
General