1-16 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
The following connections in the XSCF Unit connection configuration shown in
FIGURE 1-4 are described below:
■ Serial port connection
■ XSCF-LAN Ethernet connection
Serial Port Connection
The serial port enables workstations, PCs, and ASCII terminals to connect to the
XSCF through the serial (RS-232C) port. The user can use the XSCF Shell and access
the domain console through the XSCF Shell.
XSCF-LAN Ethernet Connection
XSCF-LAN Ethernet enables workstations and PCs to connect to the XSCF through
the XSCF-LAN port. The following can be used with XSCF-LAN Ethernet:
■ XSCF Shell via a SSH or telnet connection
■ XSCF Web from a web browser running on the terminal
■ Domain console access
■ Mail reports
■ SNMP notification
For details on these XSCF functions, see the following chapters:
■ Settings for each function: Chapter 2
■ Shell terminal and console connections: Chapter 3
■ XSCF Shell: Chapter 5
■ XSCF mail functions: Chapter 6
■ XSCF SNMP Agent functions: Chapter 7
■ XSCF Web: Chapter 9
1.3.1 Examples of LAN Connection Operations
The XSCF Unit has two 10/100 Mbps XSCF-LAN two ports. TABLE 1-2 to TABLE 1-4
outlines three XSCF-LAN operation examples.
To Next Page
Loading...
