5-18 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
server. The showldapssl(8) and setldapssl(8) commands display and specify
LDAP/SSL client settings, which are used when retrieving user informations from
an LDAP/SSL server.
showaudit / setaudit / viewaudit
The showaudit(8) and setaudit(8) commands display and specify information
such as which events can be subject for auditing. The system administrator can use
the viewaudit(8) command to display audit records (audit trail).
showloginlockout / setloginlockout
The showloginlockout(8) and setloginlockout(8) commands display and specify
information on whether to refuse a user login for a certain period of time after
multiple attempts to log in to that user account failed.
showssh / setssh
The showssh(8) and setssh(8) commands can be used to display and specify the
information on whether or not to enable the SSH access when a user logs in to XSCF.
These commands can be used in generating the host key, registering/deleting the
user public key, setting the timeout period of XSCF Shell, and setting whether or not
to permit the SSH access from domain to XSCF via DSCP.
5.8 Use the XSCF Other Commands
The following XSCF Shell commands end the XSCF Shell and display version
information. (Note)
â– exit
â– version
Note – The server provides many other commands. For details on these commands,
see the man page or the XSCF Reference Manual.
To Next Page
Loading...
Need help?
General