Fujitsu SPARC EnterpriseM3000 User Manual

Chapter 2 Setting Up XSCF 2-105
SSH Client
In this system, you can use the following SSH clients.
■ Oracle Solaris Secure Shell
■ OpenSSH
■ PuTTY
■ UTF-8 TeraTerm Pro with TTSSH2
Please refer to each software manual for command usage instructions.
TABLE 2-13 lists setting items and the corresponding shell commands.
TABLE 2-12 SSH/Telnet Administration Terms
Term Description
RW console RW (Read and Write). This is a write-enabled OS console (domain console).
RO console RO (Read Only). This is a read-only OS console
TABLE 2-13 SSH/Telnet Administration
Item Description Shell command Remarks
Display SSH
setting
information
Displays SSH settings.
Information on whether SSH is enabled or
disabled, SSH access control from domain, the
host key, fingerprint, and your user public
key is displayed.
showssh The SSH port number is
22.
When the user public key
is displayed with a user
name, the useradm
privilege is required.
Enable/
disable SSH
Enables or disables SSH. setssh The SSH is disabled by
default.
SSH access
control from
domain
Specifies whether or not to permit SSH access
from domain via the DSCP.
setssh The SSH access is
permitted by default.
Specifies "deny", when you
don't want to login to
XSCF using SSH from
domain via the DSCP.

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English