Fujitsu SPARC EnterpriseM3000 User Manual

Chapter 6 XSCF Mail Function 6-3
Parts Fault Notification
XSCF monitors components (such as CPU modules, fan units, CPU/Memory Board
unit) in the server. XSCF can notify the system administrator by email of any fault
that occurs in these devices.
FIGURE 6-2 shows mail being sent for parts fault notification to the system
administrator.
FIGURE 6-2 XSCF Fault Notification
6.2 Setting Up the Mail Function
This section explains how to set up the XSCF mail function.
The workflow is as described below. Perform each step for setup with the XSCF Shell
command line. For details on setup, see Chapter 2.
1. Log in to XSCF.
2. Make the following settings for the XSCF mail function:
Host name or IP address of the SMTP server—(See setsmtp(8))
Select POP authentication or SMTP authentication—(See setsmtp(8))
FAN
System
A fault
occurs
Fault
notification
System
administrator

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English