Fujitsu SPARC EnterpriseM3000

D-1
APPENDIX
D
Troubleshooting
This chapter describes problems that can occur during use of the XSCF console or
during the operation of the system and provides solutions for them.
D.1 Troubleshooting XSCF and FAQ
This section describes problems that may occur during the use of XSCF and provides
solutions for the problems. The section also contains frequently asked questions
along with their answers.
Could Not Log in to XSCF
■ Check whether you entered the correct user name for login.
■ Check whether you entered the correct password.
■ Check the number of XSCF users. For information about the number of users, see
Chapter 2 and Chapter 3.
Forgot the Login Password for XSCF
■ Ask a system administrator who has the platadm or useradm user privilege to
reset your password using the password(8) command.
■ If a system administrator forgets the login password, log in using the "default"
account. Then use the password(8) command to register again. For details about
logging in using the "default" account, see Chapter 2.