Fujitsu SPARC EnterpriseM3000 User Manual

B-1
APPENDIX
B
XSCF Log Information
This appendix explains the following XSCF log information that can be referenced
using the XSCF Shell showlogs(8) command on the XSCF console.
The log types that can be referenced by the showlogs(8) command are shown
below. See
TABLE 8-3 for an outline of each log, its size, and generation number.
■ XSCF Error Log
■ Power Log
■ Event Log
■ Monitor Message Log
■ Temperature and Humidity History Log
■ Console Log
■ Panic Log
■ IPL Log
The logs that can be referenced by the showaudit(8), showad(8), showldapssl(8),
and showcodactivationhistory(8), commands are shown below.
■ Audit Log
■ Active Directory Log
■ LDAP/SSL Log
■ COD Activation Log
B.1 XSCF Error Log
To reference the log related to a status notification or a fault information that
occurred in the server, use these two commands:
■ showlogs(8) error option

Fujitsu SPARC EnterpriseM3000 Specifications

General

Brand	Fujitsu
Model	SPARC EnterpriseM3000
Category	Server
Language	English