To Next Page

To Previous Page

B-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012

■ fmdump(8)

The showlogs(8) error option displays fault information in a format specific to the

platform. Conversely, the fmdump command displays fault information in a format

compatible with the Oracle Solaris OS. This latter command is provided for users

who are familiar with the Oracle Solaris OS. When the log is referenced by these two

commands, there is a difference in display format but little difference in the

information. Use these commands in the following cases:

■ To check whether a fault occurred if a message is output to the domain console

and XSCF console. (See Appendix A.)

■ To check whether the information is fault information if it was reported to the

previously registered email address.

■ To check whether the information is fault information if TRAP occurred in the

SNMP manager.

Using the showlogs(8) Command to Confirm a Fault

1. Specify the error option on the XSCF Shell and perform the showlogs(8)

command to reference the XSCF error log.

(The layout of the command example is subject to change without previous notice

for functional improvement.)

In the example above, the following items are displayed:

■ Time at which each problem was logged (Date). This date is indicated in local

time.

■ DIAGCODE that the field engineer and authorized service personnel use for

troubleshooting (Code). The user is requested to inform the field engineer and

authorized service personnel of this Code. This is useful in settling the problem at

an early stage.

■ Fault level of the component (Status). One of the following items is displayed:

XSCF> showlogs error

Date: Mar 30 15:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff00

Status: Warning Occurred: Mar 30 15:45:26.000 JST 2005

FRU: PSU#1,PSU#2

Msg: ACFAIL occurred (ACS=3)(FEP type = A1)

Date: Mar 30 17:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff00

Status: Alarm Occurred: Mar 30 15:45:26.000 JST 2005

FRU: PSU#1,PSU#2,*

Msg: ACFAIL occurred (ACS=3)(FEP type = A1)

Fujitsu SPARC EnterpriseM3000 User Manual

Questions and Answers: