B-14 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
■ Console message
B.8 COD Activation Log
When an addition and a deletion of COD hardware activation permit occurs in the
server, the XSCF firmware collects an COD activation log. Specify the log option on
the XSCF Shell and perform the showcodactivationhistory(8) command to
reference COD activation logs. For details of each log option of
showcodactivationhistory(8), see the XSCF Reference Manual or the man page.
See
TABLE 8-3 for the size and generation number of each log.
To Next Page
Loading...
